[System State Backup]
[System State Backup] The operation ended before completion.
[System State Backup] The request could not be performed because of an I/O device error.
Start running post-commands
Finished running post-commands
Deleting temporary file F:\
[java.io.InterruptedIOException] Failed to generate the backup image of System State Backup
Backup completed with error(s)
The request could not be performed because of an I/O device error. This error can be generated due to underlying hardware problem with the destination storage drive. You may also see similar error messages appear in the backup report:
-Backup stopped before completing.
-One of the backup files could not be created.
Running a Chkdsk /F /R on the volume and defragmentation of the source and destination drives may resolve this problem.
This error can also be generated due to the sector size of the disk being 4096 bytes (drives generally larger than 2TB). This is a limitation within the Windows operating system, and formatting the drive to a compatible sector size may or may not resolve the issue. You will need to backup to a destination drives that is under 2TB in total size and formatted with a sector size of 512 bytes.
To find the sector size of a drive, run the following command: fsutil fsinfo ntfsinfo x: where x is the drive letter. Refer to the bytes per sector line in the output to view the sector size of the drive.
See attached doc...